TES-1800 LOOP / PSC Tester

TES-1800A (230V)
TES-1800B (110V)
  • Large custom high contrast display.
  • Auto lock out if test resister overheats.
  • Voltage indication.
  • Measure low loop with 0.01 W resolution.
  • High loop range permit measurement
    of ground spikes.
  • Microprocessor controlled.
 
Loop Impedance Range 20 / 200 / 2000 W
Loop Impedance Accuracy +/- ( 2% + 2dgts ) at 1 W on 20 W Range
Lowest Resolution 0.01 W
Voltage Display +/- 2% + 1digit
Ac Test Current 25A nominal at 20 Range
Ac Test Period 20ms
PSC Range 200A / 2000A / 20KA
Operating Voltage 230V +/- 10% , 50Hz +/- 1 %
Withstand Voltage 3000V AC for 1 minute
Fuse Protection HRC ceramic fuse
Dimensions 200(L) x 140(W) x 95(H)mm
Weight Approx. 900g
Display 3 digit liquid crystal display with a maximum reading
of 1999.
Over Range Indication " OL " will be shown on the LCD
Penal when out of range measurement is made.
Operating Temperature and Humidity 0 ĒJ to 40 ĒJ (32ĒK to 104 ĒK), Below 80% RH
Storage Temperature -10 ĒJ to 60ĒJ (14 ĒK to 140 ĒK)
Over Temperature " OL " on " " in display
Accessories Test Lead with IEC Connector

 


TES Electrical Electronic Corp.
  • Office:7F, NO.31, Lane 513,Rui Guang Road, Neihu Dist., Taipei, Taiwan, R.O.C.
  • TEL:886-2-2799-3660 FAX:886-2-2799-5099 E-Mail:tes@ms9.hinet.net