Version |
Picture |
Feature |
View |
|
AVM-301
AVM-303
Anemometer |
 |
- Sensitive and Accurate
- Ergonomic and easy-to-use design
- Large 4 digits LCD (Liquid Crystal Display)
- 1.8 meters coiled cable and mounting nut for long extension
- Low power consumption
|
|
|
AVM-305
Anemometer |
|
- Sensitive and Accurate
- Ergonomic and easy-to-use design
- Large 4 digits LCD (Liquid Crystal Display)
- 1.8 meters coiled cable and mounting nut for long extension
- Low power consumption
- Air temperature measurement
|
|
|
TES-33
Battery Capacity Tester |
|
- Test Condition Without Shutting Down Battery.
- Simultaneously Measure Battery Resistance, Voltage, Current, Temperature.
- Auto-hold and Auto-data storage.
- Comparator Function.
- Rates Conditions as Pass, Warning, or Fail.
- Memory and Read Function
- Compact and Lightweight.
- RS232 PC Interface.
|
|
|
PROVA 200
Solar Module Analyzer |
|
- I-V Curve Test for Solar Cell.
- Maximum Solar Power (Pmax) Search by Auto-scan (60V, 6A)
- Maximum Voltage (Vmaxp) at Pmax
- Maximum Current (Imaxp) at Pmax
- Voltage at open circuit (Vopen)
- Current at short circuit (Ishort)
- I-V curve with cursor
- Optional printer (model: 300XP) to hardcopy I-V curve
- Calculation of Efficiency (%)
- Manual single point test
|
|
|
PROVA 700
Milli-Ohmmeter |
|
- Best resolution 1£g£[. Accuracy 0.05%
- 5A (120 m£[) max. test current.
- Manual or Auto Range.(There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.)
- Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement)
- Programmable Hi-Lo alarm with memory of 20 data.
|
|
TES-1370
CO2 Meter |
 |
- CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode.
- Three LCD Display for CO 2 , %RH Humidity and Air Temperature.
- Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared).
- Continuous or manual data logging (20,000 sets).
- Data hold & Maximum / Minimum with Time stamp.
|
|
|
 |
- 0.1dB Resolution
- Range from 26 to 130dB
- A&C frequency weighting
- Fast/Slow Dynamic characteristic
- Maximum with Elapsed time
- Manual data memory and read
|
|
TES-1339
Light Meter Pro.
|
 |
- Dual Display, 4-digit LCD reading.
- Spectral Sensitivity close to CIE photopic Curve.
- Measuring Levels Ranging 0.01 to 999900 Lux,0.01 to 99990 fc, Autoranging 5 step.
- Integral illuminance measurement.
- Luminous intensity measurement.
- Data Hold function.
|
|
TES-1327K
Infrared Thermometer
|
 |
- ¢J / ¢K Selectable
- Back-light LCD display
- Laser targeting
- Emissivity adjustable
- Audible and visible alarm
- Data memory and read function
- Maximum / Minimum function
|
|
PROVA-6300
Graphic Power Quality Analyzer
|
 |
- Analysis for Single Phase and Balanced 3 Phase Systems
- True RMS Value (V and I)
- Active Power (KW), Apparent (KVA) and Reactive
Power (KVAR)
- Power Factor (PF), Phase Angle( £X)
- Energy (WH, KWH, KVARH, PFH)
|
|
PROVA-6200
Graphic Power Quality Analyzer
|
 |
- Analyzer for single phase and balanced 3 phase system
- True RMS value, active power, apparent,
reactive power, power factor, phase angle
- Programmable PT ratios
- Display of overlapped voltage and current waveform
|
|
TES-3660
Autoranging Insulation Tester
|
 |
- Large LCD with analog bar graph and digital display.
- 250V, 500V, 1000V output voltage for insulation M £[ testing.
- 4000M £[ insulation testing with automatically switch to
voltage measurement.
- Lo £[ function for testing connections.
- Autodischarge of capacitive voltage charges.
|
|
TES-3079K
Power Clamp Meter
|
 |
- Very affordable cost
- All every functions you could have¡GTrue
Power, Apparent Power & Phase Angle (-60 ¢X ~ 0 ¢X ~+ 60 ¢X )
- Capacitance¡G7000 £gF
- Insolution Test¡G100M
- Temperature¡G-50 ¢J ~ 900 ¢J
|
|
