-
New Products
- Odor Sensing Meter
- Particle Counter/PM2.5 Air Quality Monitor
- Digital Earth Tester/ Solar Power Meter
- Thermo/Hygro/Barometer
- wind speed / wind volume / wind direction
- Turbidity Meter/ pH/ORP/Temperature Meter
- Vibration Meter
- Coating Thickness Tester
- Brix Meter
- Light Meter
- Photosynthesis Light Quantum Meter/ Chroma Meter/ Luminance Meter
- Sound Level Meter
- CO Meter/ NDIR CO2 Meter
- Thermometer
- Infrared Thermometer
- Digital Tachometer
- HVAC Trms Clamp Meter
- ElectroMagnetic Field Tester/ Electrosmog Meter
- Power Analyzer
- Battery Capacity Tester
- Flexible AC Current Clamp
- Micro Ohmmeter
- Digital Multimeter
- Digital Insulation Tester
- Digital Earth Tester
- Digital Clamp Meter
- Multifunction Calibrator
- Lan Cablemeter
- Accessories
ElectroMagnetic Field Tester/ Electrosmog Meter
AC ELECTROSMOG METER (3 axis)
- Use rechargeable lithium-ion battery pack
- Frequency range 10MHz to 8GHz.
- 3 axis isotropic measurements of EMF.
- Non-directional (isotropic) measurement with three-channel measurement probe.
- High dynamic range.
- Configurable alarm threshold and memory function.
- LCD backlight function.
- Easy & safety to use. APPLICATIONS:
- High frequency (RF) electromagnetic wave field strength measurement.
- Mobil phone base station antenna radiation power density measurement.
- Wireless communication applications (CW, TDMA, GSM, DECT).
- RF power measurement for transmitters.
- Wireless LAN (Wi-Fi) detection, installation.
- Spy camera, wireless bug finder.
- Cellular/Cordless phone radiation safety level.
- Microwave oven leakage detection.
- Personal living environment EMF safety.
Sensor type
|
Electric field (E).
|
|
Frequency range
|
10MHz to 8GHz
|
|
Directional characteristic
|
Isotropic, 3-dimensional.
|
|
Measurement range (CW signal > 10MHz)
|
20mV/m to 108.0V/m ,
53μA/m to 286.4mA/m ,
1μW/m² to 30.93W/m² ,
0μW/cm² to 3.093mW/cm²
|
|
Dynamic range
|
Typical 75dB
|
|
Absolute error (@1V/m and 10MHz)
|
±1.0dB
|
|
Frequency response (taking into
account typ. CAL
factor)
|
±1.0dB (10MHz to 1.9GHz)
±2.4dB (1.9GHz to 8GHz)
|
|
Isotropy deviation
|
Typ. ±1.0dB for f >10MHz
|
|
Overload limit
|
10.61mW/cm² (200V/m)
|
|
Temperature response (0 to 50℃)
|
±0.5dB
|
|
Measurement method |
Digital, triaxial measurement |
Measurement range selection |
One continuous range |
Display resolution |
0.1mV/m, 0.1μA/m, 0.1μW/m², 0.001μW/cm² |
Setting time |
Typically 1s (0 to 90% of meas. value) |
Display refresh rate |
Typically 0.5 seconds |
Display type |
LCD 4 digit |
Audible alarm |
Buzzer |
Measurement units |
mV/m, V/m, μA/m, mA/m, μW/m², mW/m², W/m²,μW/cm², mW/cm² |
Measurement display value |
Instantaneous measured value, maximum value or maximum average value |
Measurement alarm function |
Adjustable threshold with ON/OFF |
Measurement calibration factor CAL |
Adjustable |
Manual data memory and read storage |
99 sets (only recall by meter) |
Rechargeable lithium-ion battery |
3.6V, 1940mAh Charging time: Approx. 3 hours |
Battery operation time |
Approx. 10 hours |
Dimensions |
Approx. 67(W) x 60(T) x 247 (L)mm |
Weight (including battery) |
Approx. 250g |
Accessories |
Instruction manual, Rechargeable Lithium-ion battery, Carrying case, AC adaptor (DC 5V 1.5A) |