Multifunction Calibrator

new products
Home > Products > Multifunction Calibrator
4-20mA Loop Calibrator + Thermometer
PROVA-135

4-20mA Loop Calibrator + Thermometer

  • Source 4~20mA, 0~24mA with 1μA resolution (1KΩ load, 24V loop supply), basic accuracy 0.025%.
  • Source 0~24.000V with 1mV resolution.
  • Source frequency 1~20000Hz square wave with programmable duty cycle (1~99%).
  • Auto step and auto ramp for sourcing mA, V.
  • Easy fixed 25% up and down, or programmable percentage (1~99%) increase and decrease (mA, V).
  • Measure DC mA with loop power (24V output).
  • Measure DC V.
  • Measure Temperature (°C, °F) of 11 types of thermocouples (K, J, E, T, R, S, N, L, U, B and C).
  • Calibrator grade precision temperature measurement with 0.1*C & 0.1*F resolution.
  • Detection of thermocouples disconnection.
  • Source and Measure at the same time.
  • Warning for overload, output open (mA) or short (V).
  • Short circuit protection for output.
  • Battery power indication (%) when turn on the calibrator. Applications:
  • Calibration of 4~20mA panel meters.
  • LED brightness testing (0~24mA).
  • Temperature calibration of panel meters or instruments for 11 types of thermocouples.
more information
Process Calibrator/Simulator + Function Generator
PROVA-133

Process Calibrator/Simulator + Function Generator

  • Simulate 4~20 mA process transmitter
  • Source 4~20 mA loop Current
  • Simulate electronic load (Max. 30V, 20mA)
  • Test LED brightness (0~24mA)
  • Source -9.999~70mV and 0~15V
  • Calibrate temperature of 11 types of thermocouples
  • Handheld function generator of sine wave, square wave, triangular wave, arbitrary wave from 0.3 to 20KHz)
  • Pulse generator (3μS to 999.99mS)
  • Map 4~20 mA into engineering units
  • Source: mA, V, Hz, sine wave, square wave, triangular wave, truncated sine wave, user programmable waveform and temperature.
  • Measure: Current (DC mA), Voltage (DC mV, DC V), and temperature (°C, °F)
  • Measure 4~20 mA with 24V loop supply simultaneously
  • Selectable 250Ω HART resistor to facilitate use with HART communication device
  • Programmable cold junction compensation for temperature measurement
  • Auto step and auto ramp for sourcing mA, V, and temperature
  • Dot matrix LCD with backlight
  • Rechargeable lithium battery (1600mAh)
  • Data logging function for source and measurement
  • Program calibrator through PC USB port
  • Programmable 0% and 100% value for easy 25% step function
  • DTMF (Dual Tone Multi-Frequency) can perform professional testing for telephone line and audio product (MP3 or MD)
more information
Multifunction Process Calibrator + DMM
PROVA-131

Multifunction Process Calibrator + DMM

  • Source 4~20mA loop current (1KΩ load, 24V loop supply).
  • Source 0~100mV, 0~1.000V, 0~12.000V.
  • Calibrate temperature of 11 types of thermocouples (K, J, E, T, R, S, N, L, U, B and C).
  • Source frequency with programmable duty cycle.
  • Calibrate thermocouple transmitters.
  • DMM 24000 counts.
  • DMM functions (Measure): DC/AC mA, DC/AC mV, DC/AC V (AC TRMS); Ω, Frequency (duty cycle %), Diode, Continuity, Temperature (°C, °F).
  • Source and Measure Simultaneously.
  • Selectable HART 250Ω resistor to facilitate use with HART communication device.
  • Auto step and auto ramp for sourcing mA, V and temperature
  • 25% ▲, 25% ▼, or programmable percentage (0~100%) increase and decrease
  • Warning for overload, output open (mA) or short (mV, V).
  • Short circuit protection for voltage output.
  • Battery power indication (%).
  • Clear and easy user interface.
more information
Documenting Multifunction Calibrator and Arbitrary Function Generator
PROVA iCal

Documenting Multifunction Calibrator and Arbitrary Function Generator

  • Unique mapping function let you calibrate temperature (300 °C) or voltage (220V) directly.
  • iCal is a multifunction calibrator and an arbitrary function generator.
  • Source: mA (4 to 20mA), V (0 to 15V, 0 to 70mV), Hz, sine wave, square wave, triangular wave, truncated sine wave, user programmable waveform and temperature for 11 types of thermocouples.
  • Measure: current (mA), voltage (V, mV) and temperature (℃ or °F).
  • Programmable cold junction compensation allows users to fine tune temperature output and measurement.
  • Programmable 0% and 100% value for easy 25% step function.
  • Output error warning when output is shorted or open.
  • Short circuit protection for voltage output.
  • Clear and easy user interface (numerical key pad, sliding switch and dot matrix LCM with backlight).
  • Voltage, frequency, PWM duty-cycle (square wave and triangular wave), and offset are programmable in the Hz function.
  • Frequency range (0.3Hz to 20KHz) covers application of audio band (speaker, MP3, MD etc.)
  • DTMF (Dual Tone Multi-Frequency) can perform professional testing for telephone line and audio product (MP3 or MD).
  • Auto-step and auto-ramp functions can quickly perform linear test.
  • PC can program calibrator through USB port.
  • Data logging with programmable sampling time (0~255 sec.) and memory of 4000 records.
  • Rechargeable lithium battery (1600mAH) with built-in charging circuit.
  • Calibration results (source & measure) can be saved in memory (2000 records). Then users download them to a PC for documentation.
  • To distinguish calibration data at different locations, data can be saved under different file names.
more information
CALIBRATOR
PROVA-100

CALIBRATOR

  • 4-20mA, with 1 μ A resolution
  • Basic Accuracy 0.025% + 5 μ A
  • Auto-Ramp and Easy Step Functions
  • 1-100% Input
  • 0-20mA, 0-24mA Selectable
  • Easy Just-Type-in Number Operation
more information
Process Calibrator
PROVA-123

Process Calibrator

  • 4-20mA, 0-20mA, 0-24mA with 1 μA resolution
  • 0-100mV with 10 μV resolution
  • 0-12V with 1mV resolution
  • Thermocouple K,J,E,T TYPE 1 o C 1 o F resolution
  • Frequency 2 - 50,000Hz
more information
Specification changes subject without notice.