Video
PRODUCT CATALOG
-
New Products
- Brix Meter
- Coating Thickness Tester
- Digital Earth Tester/Solar Power Meter
- Odor Sensing Meter/PM2.5 Air Quality Monitor & Particle Counter
- Vibration Meter
- Particle Counter/PM2.5 Air Quality Monitor
- Thermo-Hygro-Barometer
- Photosynthesis Light Quantum Meter/ Chroma Meter/ Luminance Meter/ Light Meter
- Sound Level Meter
- CO Meter/ NDIR CO2 Meter
- Infrared Thermometer
- Thermometer
- ElectroMagnetic Field Tester/ Electrosmog Meter
- Turbidity Meter/ pH/ORP/Temperature Meter
- HVAC Trms Clamp Meter
- Power Analyzer
- Battery Capacity Tester
- Flexible AC Current Clamp
- Weather Station/ wind speed wind volume wind direction/ Rotating speed
- Digital Multimeter
- Micro Ohmmeter
- Digital Earth Tester
- Digital Insulation Tester
- Digital Clamp Meter
- Multifunction Calibrator
- Lan Cablemeter
- Accessories
Digital Clamp Meter
HOT PRODUCTS
.jpg)
.jpg)
.jpg)
.jpg)
.jpg )
TES-3910
Trms Clamp Meter (DC/AC 1000A)
- Capacitance measurement 1000µF
- Variable-frequency drive (VFD) V & Hz measurement.
- Lo-Z voltage measurement to drain ghost voltages.
- Check 3Φ phase sequence.
- True RMS reading on AC and DC+AC mode.
- Inrush current measurement.
- A measurement for HVAC flame sensors.
- mV measurement range to interface with other accessories.
- Crest Factor & Harmonic ratio measurement.
- Data hold, Auto hold & Peak hold mode.
- Max/Min/Avg record mode.
- Data memory & read function.
TES-3900/TES-3901
Clamp Meter/Trms Clamp Meter
- Variable-frequency drives (VFD) V & Hz measurement.
- LoZ voltage measurement to drain ghost voltages.
- Check 3Φ phase sequence.
- Motor Inrush current measurement.
- True RMS reading on AC and DC+AC mode. (3901)
- uA measurement for HVAC flame sensors. (3901)
- mV measurement range to interface with other accessories. (3901)
- Crest Factor (C-F) & Harmonic Ratio (H-R) measurement. (3901)
- Backlight LCD display . (3901)
- Data hold, Auto hold & Peak hold mode.
- Max/Min record mode.
- Data memory & read function
.jpg )
TES-3010A
Digital Clamp Meter
- Category: CAT II 1000V , CAT III 600V
- ACA: 20A, 200A, 600A.
- Peak /Data Hold.
- Frequency Count /Diode Check.
- Continuity Buzzer.
- Low Battery Indication.
.jpg )
TES-3012A
Digital Clamp Meter
- Category: CAT II 1000V , CAT III 600V
- ACA: 20A, 200A, 1000A.
- Peak /Data Hold.
- Frequency Count /Diode Check.
- Continuity Buzzer.
- Low Battery Indication.
.jpg )
TES-3013 / TES-3014
Digital Clamp Meter
- Category: CAT II 1000V , CAT III 600V
- Capacitance measurement 2000µF.
- Variable-frequency drive VFD voltage & Current measurement.
- ACA: 600A (3013), 1000A (3014)
- Peak / Data Hold.
- Frequency Count / Diode Check.
- Continuity Buzzer.
TES-3040H
Digital AC Clamp Meter
- 3-3/4 Digital LCD with bar-graph
- Auto-Ranging on Volt, Ohm, Current, Frequency measurements
- Auto-power off
- Data Hold mode
- MAX/MIN Hold mode
- Zero Adjustment/Relative Reading
.jpg )
TES-3050H
Digital DC/AC Clamp Meter
- 3-3/4 Digital LCD with bar-graph.
- Auto-Ranging on Volt, Ohm, Current,
- Frequency measurements.
- Auto-power off.
- Data Hold mode.
- MAX/MIN Hold mode.
- Zero Adjustment/Relative Reading.
- PEAK Hold mode.
（only ACV and ACA Range）
TES-3092
DC/AC CLAMP METER
- Compact Size.
- AC/DC Current Measurement (AC 700A / DC 800A).
- 600 V AC & 200V DC, Ohm / Continuity Beeper.
- One Touch DCA Zero.
.jpg )
PROVA-A1/PROVA-A3
DC/AC Clamp Meter
- Five kinds of Dual display:
Hold + Average
Max + Min
ΔMax + ΔMin
Peak Max + Peak Min
Δ Peak Max + Δ Peak Min - With Backlight
- Auto Range: V, A, Resistance, Capacitance and Temperature.
- Auto-Power-off function (30 min)
- Ideal for works in crowded switch box or cable areas
.jpg )
PROVA - A11
mA AC/DC Clamp Meter
- Very high resolution DC 1mA, AC 0.1mA.
- AC/DC (mA, A) current measurement: 6A / 60A.
- AC/DC (V) voltage measurement: 60V / 600V.
- AC current measurement: TRMS.
- Resistance, Continuity, Capacitance, Diode and Temperature (℃/℉) measurement.
- Voltage/Current Peak value measurement.
- 6000 counts
- Auto and Manual ranges for AC mA, AC/DC V, Resistance and Capacitance.
- One Touch Zero for DCA adjustment.
- 25mm large jaw diameter.
- Auto-power-off function (30 min.) and Backlight.
- Delta ( ) functions w.r.t. hold value.
- Dual display: Hold + Ave, Max + Min,ΔMax +ΔMin.
- Dual display (peak hold): Hold + Ave, Peak Max + Peak Min,ΔPeak Max +ΔPeak Min.
- Low Pass Filter (LPF, 1KHz, -3dB) (e.g. for VFD measurement)
- 600V overload protection for Resistance and Capacitance measurement.
- Ideal for works in crowded switch box or cable areas.
PROVA A9+
EV Clamp Meter
- Designed for EV (Electric Vehicle)
- Both lower DC Current and High DC Current(1000A)
- Accurate AC/DC digital clamp meter
- Best accuracy ±1.5%±3dgts
- AC/ DC 1mA high resolution
- True RMS measurement
- One touch zero (Δ) for DCA adjustment
- 25 mm diameter jaws
- Fast bar graph display (30 times/sec.) for transient observation
- In-Rush Current Measurement with 100mS integration time
- Non-Contact Frequency Measurement (min. sensitivity 0.06 AC A)
- Non-Contact Voltage (NCV) Detection from 80V to 600V at 50/60Hz
- Low Pass Filter (LPF) at 1 KHz Cut-off Frequency
- Large 3 3/4 digits LCD
- Data Hold function
- 15 minutes auto-power-off with beeping warning before turning off
- Backlight with 5 minutes of auto-backlight-off
- Easy single rotary switch for any function selection
- Ideal for works in crowded switch box or cable areas
TES-3082
True RMS Clamp Meter
EN61010-1
600V INSTALLATION CAT III
POLLUTION DEGREE 2
FEATURES：- 3-3/4 Digital LCD.
- Auto-Ranging Frequency measurements.
- Auto ZERO mode.
- Data Hold mode.
- PEAK Hold mode.
- True Rms
Specification changes subject without notice.